Circular Vibrating Screen

Vibrating screen

The vibrating screen is a kind of sieving equipment of international advanced level, developed by our company on the basis of carrying on the advantages of traditional screens and absorbing the outstanding technology from abroad.

It is widely used for grading and screening materials in the following fields: minerals, quarry, building materials, water conservancy and hydropower, transportation, chemical industry, smelting and so on.

Two common types of Vibrating screen

Circular vibrating screen

Circular Vibrating Screen earns this name by reason of its approximately circular movement. It is of multilayer and high efficiency. The eccentric shaft vibration exciter and partial block help to adjust amplitude. This kind of screen is of long streamline, many specifications and clear screening for different specifications.

The YK series Circular vibrating screen moves on a circular motion. It is a multi-layer and high efficiency vibrating screen. Advantages are: stable structure, strong exciting force, high efficiency, little noise pollution, handy maintenance and safety; circular vibrating screen has been widely used in mine, construction, transportation, energy and chemical industries. (Note: According to different situation of customer, our company applies vibrating screen with different specifications and vibrating modes.

Linear vibrating screen

The vibrating equipment is used to separate the stuff. It is composed of main frame, screen web, electric motor, eccentric bock, rubber spring, coupler and so on .We will offer suitable type according to your requirements.

ZSG series of linear vibrating screens are widely applied to screen dry materials in Concentrator, building materials, water and power, light industry and building materials. The advantaged of this series screen are as follows: stable operation, lower energy consumption, low noise, high efficiency and long service life.

Usage and maintenance for using Vibrating screen

Before starting the vibrating screen, make sure there is nothing left on the screen surface, as it is strictly prohibited. When the machine is in normal operation, you can start to feed materials. Before the machine is stopped, you must stop feeding materials first. You should pay careful observation. If any fault appears, stop the machine immediately, and it can be started again only if the fault is removed.

Question: Which vibrating mesh cooperated with Vibrating screen in different material crushing?

Answer: According to the size of the screen mesh, materials will be separated into different particle size level, called screening. This is usual used for screening the thicker size materials. By particles in the medium (usually water) in the different settling velocity, the material may down into different levels, called grading. This is usual used to separate smaller particle size materials. Screening and grading are used to extract some appropriate size materials in the process of crushing, or the materials are selected into different levels of granularity.

Technical parameters of Circular vibrating screen

Note:processing Capacity May Vary With Different Materials And Feeding Sizes.