Product Knowledge
Knowing about the accident and emphasising on prevention for Belt conveyor
The improper operation of belt conveyor will cause accident, even cause casualties sometimes. So safety operation and analyse the reason of belt conveyor accident are important for workers and operators.
1. Belt conveyor deviation accident is one common fault. The reason that caused belt deviation are: the blanking material position is deflected and impacted, belt tension bridle and bearing roller device are misused, the transportation distance is too long. This belt conveyor accident can cause belt avulsion, material loss and production halts, even stop operation finally.
2. Machinery accident. If this kind of belt conveyor accident can be find timely, the equipment will be damaged seriously, the maintenance and repair time will be longer, the effect on production is bigger.
3. Personnel accident. Belt conveyor accident can cause casualty, so it is necessary to deal with belt joint before operation, process the joint when lengthening or shortening belt conveyor.
The production belt conveyor plant in hxjq has the features of large conveying capacity, transmission distance is long, smooth transportation, materials and conveyor without relative motion, the noise is small, simple structure, easy maintenance, less energy consumption. The daily maintenance of belt conveyor plant is important, it influent the normal operation if any problem not be found timely.
The belt conveyor plant in the course of work should be looked after. Custody must be the one has general technical knowledge and is familiar with the performance of the conveyor machine. Belt conveyor plant should be uniformly fed, not feeding too much and make the conveyor filled with material and cause overflow.
In the working process of the belt conveyor plant, non-custody staff should not be near machine. Any person shall not touch the rotating parts of belt conveyor plant. When failure occurs, the operators must immediately stop the machine to eliminate failure. The belt conveyor plant should keep normal lubrication and replace individual damage parts in the course of operation, each for six months must overhaul. Replace the damage parts and change lubrication when check the belt conveyor machine.
HXJQ specialists based on years of research and development on high quality belt conveyor machine. All kinds of belt conveyor adopts special material to be produced. It is safer than ordinary belt machine.
Related Articles：
Relationships Between Belt Speed and Bandwidth of Belt ConveyorGeneral Outlet for Hongxing Belt EquipmentFor avoiding deterioration of belt conveyor routine detection is requiredCategories of Conveyor belt for Belt conveyor